You are currently reviewing an older revision of this page.
TT Text not visible Front viewWhen text using a True Type font is placed in Top view, it is notvisible in Front or Right view. Steps to reproduce:1. Open new 3D file2. Place a piece of text in Top view using MicroStation font3. Place a piece of text in Top view using True Type font4. In Front or Right view, notice that text with MS font is visible,while text with TT font is not5. Save, and open same file in 08.05.02.70. Both pieces of text arenow visible in Front view
This problem can be resolved by turning Anti-alias text OFF. Go toWorkspace > Preferences > View Options, then change the Anti-alias Textdrop down from ON to OFF