Solids are dropping to wireframe when saving to DWG format.Product: MicroStation V8 2004 EditionVersion: 08.05.02.35Area: DWG
Change Save as option "Flat Solids and Surfaces" and/or "Curved Solidsand Surfaces" to Acis Entity (Body or 3D Solid).(most likely reason)Steps:1. When saving DWG, go to DWG options2. Open the "Entity Mapping" section.3. Set Flat Solids and Surfaces = Acis Entity (Body or 3D Solid)4. Set Curved Solids and Surfaces = Acis Entity (Body or 3D Solid)Other possible reasons:-The Solids Working Area is too coarse or too detailed.Solution:1. From Menu bar, go to Settings > Design File... [Design File dialogopens]2. Open the "Working Units" Category3. Go into "Advanced" settings.4. Change Solids Working Area t o 1.0 Kilometer or equivalent.-The Elements are too far from the Center of design.Solution:1. Select all the elements.2. Start Move tool.3. Open Key-in window.4. Key-in: XY=0,0,0|UOR5. Reset.6. Fit view.This will move the elements to the center of the design area.