View orientation must match the boundary orientationGetting the error "View orientation must match the boundary orientation"when trying to clip mask a reference file.This only occurs in 3D filesProduct: MicroStation V8iVersion: 08.11.05.17Area: Reference, Problem ID# 61997: , ERRORMESSAGESee Also: GENERALINFORMATION
Possible Solutions:1. In the first scenario, the Fence being placed from an Element, andthe Element was not planar.Once the entire element had the same Z-elevation, the Clip Mask workedcorrectly.2.. The Reference was at a different rotation then the Master file, andonce detached and reattached, the Clip Mask worked correctlyhttp://communities.bentley.com/products/microstation/microstation_v8_xm_edition/f/141/p/13610/25433.aspx#25433