You are currently reviewing an older revision of this page.
Can not select certain elements in a 3d file, but is still able to snapto them.Product: MicroStation V8 2004 EditionVersion: 08.05.00.64Area: General, PROBLEMSOLVING
Enable Boresite Lock OR make sure the display clipping planes are beyondthe elements to be selected.Possible reasons:-Make sure the boresite lock is enabled.-Make sure the display depths are beyond the elements depth in the view.To enable Boresite:-From Menu bar, go to Settings > Locks > BoresiteOR-Key-in: LOCK BORESITE [OFF | ON | TOGGLE]Note: Save settings to keep these settings for future sessions of thisfile.Note about display depth:MicroStation displays elements that are AT and inside the front and backclipping planes. MicroStation selects elements that are ONLY inside theclipping planes. So if the clipping plane limits are at the same rangeas an element, it can't be selected, but it is visible.