You are currently reviewing an older revision of this page.
Export STL is not accurateWhen STL file is imported back in, it is not same size as originalelement.Product: MicroStation V8 2004 EditionVersion: 08.05.02.35Area: Import/Export (Save as), PROBLEMSOLVINGSee Also: Help documentation: "Preparing to Draw"
Geometry is to far from center of design (COD).Move elements back to center of design:1. Select elements2. Start Move command3. Snap to move point and accept.4. key-in: xy=0,0,0|uor [press enter]