My dimensions turn upside down when referencing saved views into mymaster file. How can I resolve this?Product: MicroStation V7.1/JVersion: 07.01.04.16Area: area, Dimensions
Open the file that contains the dimension. Attach the saved view that isused during the reference attachment. In the MicroStation Key inBrowser, key in "MDL L CALCULAT" and then press enter, followed by "calctcb->ad4.ext_dimflg.viewRotation=1" and then pres s enter again.Finally key in "change dimension view 1" and then press enter. Selectthe dimension hat does not display correctly and accept. Select SaveSettings. Open The master file again and the dimension should appearcorrectly.The key in "calc tcb->ad4.ext_dimflg.viewRotation=1" is a design filesetting, so if you want this setting to be permanent in all files set itin your seed file. If you have a design file with previously placeddimensions, you can use the key in to set the value but you have to usethe key in "change dimension view 1" to update the dimension. Note, whenyou use the "change dimension view 1" key in you have to be in the savedview where the dimension was placed. The dimension will displayincorrectly if the key in is used in another view.To check whether the value of tcb->ad4.ext_dimflg.viewRotation is 1 or0, use the key in "calc tcb->ad4.ext_dimflg. viewRotation".