Cannot modify selection sets. (copy, move, rotate, delete, etc.)Cannot use modify tools on a selection set. If a selection set iscreated, the tool is started, selection set is unselected or only thelast element selected is modifying.Steps to Reproduce:-Select a group of elements with selection window, Power Selector orSelect By Attributes-Start a tool that will edit select sets (copy, move, Change ElementAttributes, etc.)Result 1:The selection set will unselect.Result 2The selection set is still selected, however after finishing theoperation, only 1 of the elements are modified.Product: MicroStation V8Version: N\AArea: General
Selection lock is off.There are 2 possible methods to enable selection lock.MICROSTATION KEY-INKey-in: LOCK SELECTION ON(This will enable locking of selection sets until deselecting.)DEFINING THE TCB VARIABLEKey-in: MDL LOAD CALCULAT(This loads the calculator mdl application)Key-in: CALCULATOR TCB->EXT_LOCKS.SELECTION_SET=1(This will enable the capability to modify selection sets.)ADDITIONAL INFORMATIONTo disable the selection set lockkey-in: LOCK SELECTION OFFORkey-in: CALCULATOR TCB->EXT_LOCKS.SELECTION_SET=0