Tangent Snapping an arc to two lines is not producing consistentresults. The arc in dynamics (before placing final point) appears tojump and not glide along the two lines consistently.
The elements are too far from the center of the design.More Accuracy is needed to locate and place arc tangents then othertools or snap modes.-Steps to move the elements back to the center of the design:1. Select all the elements.2. Start Move tool.3. Open Key-in window.4. Key-in: XY=0,0,0|UOR5. Reset.6. Fit view.Notes:-Glob al Origin will need to be adjusted to correct coordinates.
Product TechNotes and FAQs
Bentley HomepageBentley Technical Support KnowledgeBaseBentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!