You are currently reviewing an older revision of this page.
Set highlight colors using key-insIn Settings > Design File, Category Color, three colors can beconfigured:- Element Highlight Color- Drawing Pointer Color- Selection Set ColorHow to configure these using key-ins?Product: MicroStation V8Version: N\AArea: GUI
Use preprocessor key-ins:To enable different highlight colors for Element Highlight Color and -Selection Set Color: "mdl keyin calculat calc tcb->selectionHiliteOverride=1"To set the Element Highlight Color to yellow: "mdl keyin calculat calctcb->hiliteColor=6"To set the Drawing Pointer Color to white: "mdl keyin calculat calctcb->xorColor=7"To set the Selection Set Color to cyan: "mdl keyin calculat calctcb->selectionHiliteColor=3"For the color numbers in the above three key-ins a number from 0 to 9must be used:0 black, 1 blue, 2 green, 3 cyan, 4 red, 5 pink, 6 yellow, 7 white, 8light grey, 9 dark grey.These settings are saved with the design file. File > Save Settings tokeep the settings for the next MicroStation session.