You are currently reviewing an older revision of this page.
How to replace design file header.
From time to time in a design file you may have trouble with certain tools and functions not working or working erratically. The file is not necessarily corrupted as it open in MicroStation but it is in fact not display consistent behavior. Replacing the design file header or placing the graphic in another file may help resolve this issue.
6. Click on Ok button (this dialog can be dismissed permanently by checking the "Do no display again" check box
This will merge the reference file into the new file and replace the original file header with the new header from this file
XXXXXXX(Add links as needed for other relevant Be Communities content.)XXXXXXX
Things to try that may correct strange problems or errors within filesIf performing a task and getting a error(s), here is some things can bedone to try to correct the data.
These methods may or may not work, but have high success rates forunknown problems or unordinary behavior.Notes:-Will effectively replace the design header.-The down side is the references (if any) will need to be reattached.RREPEAT ABOVE STEPS ON THE INDIVIDUAL REFERENCE ATTACHMENTSProblem data could be inside any reference attached. Try turning off allreference and then turn on one at a time until the error reports. Thenrun the above steps on the reference file individually to attempt toclear the problem.