This document presents a discussion on the -omega option that is part of the &EQUI command. The &EQUI command in MOSES computes a static equilibrium position with a modified Newton method.  Also presented is an example when the -omega option in the &EQUI command is used to reach equilibrium.

You can find a good description of the Newton method on Wikipedia.  The article in Wikipedia shows…

The MOSES product team is pleased to announce the availability of MOSES CONNECT Edition (Version 10.14.00.12) on the Fulfillment Center.

NOTE: This is an update and will overwrite earlier installations of MOSES 10.13, etc.

Version 10.14 of MOSES includes a Technology Preview of the new MOSES Executive. Installed alongside the classic versions of the MOSES applications, the Executive aims to replace and build on the functionality…

This document explains how to set up and interchange the working units in MOSES.

Two sets of files are used to demonstrate the unit definition and units interchange to assess the longitudinal strength of a barge. The two sets of files can be found on ...\hdesk\runs\samples\how_to directory.

MOSES v10.14 was used in generating results for this work.

Specify Analysis Units

The analysis units are specified with the &DIM…

This document explains how the added inertia coefficients and linearized damping coefficients are calculated and reported in MOSES. Often asked questions are also discussed at the end of the document.

MOSES v10.13 was used in generating results for this work.

Frequency Domain Analysis and Output Results

A frequency domain analysis is usually the basis for generating transfer functions (RAOs) for frequency dependent excitation…