Dear MOSES Experts,
Just a quick question for about Stability Analysis using MOSES 7.10,
How do you define on .CIF file when you need an output of 'STATIC HEEL DUE TO WIND'?
Because I can only know how to define for 'STATIC HEEL w/o WIND' with I_ZCROSS while on MOSES 7.00 (old version) can manage automatically output both of it at once.
I need it both results of "STATIC HEEL without WIND and due to WIND" from MOSES 7.10 (not the old one) because due to of one this stability assessment:
"The barge shall not exceed 5 deg (conservative) tilt or list inclination during lifting operations without environment loads and 5 deg inclination with environment loads (Refers to ASME B30.8-2004 Floating Cranes and Floating Derricks which is approx. 5-7 deg limitation)."
Please answer.
Thank you.
www.linkedin.com/in/jamharihidayat
Hello Mustofa,
I am making the assumption that you are using the stab_ok command. Angle of heel due to wind is usually referred to as the the first intercept of the heeling curve and the righting arm curve. You can designate the "not exceed 5 deg" by using the option "-i_theta1 5" for intact or "-d_theta1 5" for damage.
I hope this helps.
Georgina Maldonado
Answer Verified By: Jamhari Hidayat Bin Mustofa