Learning maxsurf manual

Question

Hi everybody! 
 I am reading and follow the manual call Learning maxsurf manual. 
 In chapter 5: Designing in Maxsurf. There is a section called starting a design_ Video. 
 You can click web or disk. When I click web appear videos but not that video. This is the web I am sent: 
 www.bentley.com/.../maxsurf 
 When I click a disk, appear the image that I attached. 
 
 I would like to find the disk of the learning manual. 
 
 Can you help me? 
 
 Thanks in advanced. 
 Regards, 
 
 MJ

pat couser · Accepted Answer

Please have a look at the videos on our youtube channel : Bentley Offshore Analysis - YouTube

pat couser · Answer

No, there are no videos linked with the manual -- all the videos are now on youtube, we have organised them into playlists that cover different topics Bentley Offshore Analysis - YouTube 
 the channel is shared with MOSES and SACS so make sure you look at the MAXSURF videos and playlists

pat couser · Answer

I found the old training material you were referring to and you can download it here: 
 Learning MAXSURF - Self-paced training material from 2011 - MAXSURF | MOSES | SACS Files - MAXSURF | MOSES | SACS - Bentley Communities 
 
 communities.bentley.com/.../learning-maxsurf-manual Learning MAXSURF - Self-paced training material from 2011 
 This is somewhat dated self-paced training material that we created in 2011. However the underlying principles of how the software works are essentially the same. In the newer versions of MAXSURF you will find an updated user interface and many new commands, so there are possibly alternative ways of doing things these days. 
 This training material will give you a good introduction to modelling with NURB surfaces in MAXSURF Modeler. It contains a pdf document which takes you through the various steps and also some short video clips which demonstrate the various topics described in the text. 
 Don't forget that there are also many instructional videos on our You-Tube channel: Bentley Offshore Analysis - YouTube www.youtube.com/.../playlists

pat couser · Answer

you should use the manual thats installed with the software :-) Then the manual will correspond to the software you are using. It wont necessarily make sense to use the manual for version 23 if you are using version 20 software. You can download the latest version from Software Downloads (bentley.com) (if you have SELECT subscription)