Hello,
I am a novice in Maxsurf stability, I am learning Large angle stability in Maxsurf. For my learning, I open a sample hmd file in stability, it was sample design > Ships > ContainerShip_Pro.hmd . Here sample loadcase is pregiven. I just applied the criteria and Heeling angle from Analysis menu and press start analysis. It open a word file like this. Some criteria is failed Could you please tell me what's wrong with this? (NB, The ship LBP is 105m, which is greater than 100m)
I eagerly waiting for reply
Hi Ocean Man,
So - from what I can see here, these criteria have failed because the boat doesn't pass stability. I can't see anything wrong - but I also can't see much info.
The descriptions on the rules point you to look at 2.3.2.6 of the code (I found it on page 25 of https://www.traficom.fi/sites/default/files/media/regulation/31519-MSC_267%2885%29.pdf)
So at the moment, your "must be greater than" values are probably all high because you haven't calculated the C values.
As a general rule for troubleshooting I would recommend:
- Use Display | Data Format (when the criteria window is active) to view the Verbose results. This lets you see interim values such as the angle at which limits have been measured
- Look at the GZ curve and see if anything looks out of the ordinary
- Recall views from the analysis to see if there are any unexpected trim issues etc.
Answer Verified By: Ocean Man