While doing collapse analysis using DNV-RP-C204 (September 2021), So many ship indentations curves are presented in figure 3-4. My Jacket leg diameter is 2.0m/2.5m, For stern end impact D=10m or D=1.5m, which curve should selected for correct energy absorption by the ship
Hello P S Dhivya Bharati,
As Bentley Technical support, we have provided a response to this query to your case number CS0099578 in Service Now portal.
However, as this forum gives an opportunity to brainstorm practical ideas from different Bentley users, we are delighted to see this discussion is active here.