• HOW TO GENERATE SEA STATE RAO IN MOSES?

    Dear Georgina, Kindly advise how to generate sea state RAO in MOSES.
  • Mooring line dynamics (MOSES)

    Dear Georgina, I have a comment from one of the classification society saying that MOSES doesn't take into effect of line dynamics in time domain simulation and hence we are instructed to use the higher factor of safety (similar to frequency domain…
  • How the catenary lines are modelled in Moses?

    Dear Georgina, How mooring line (B CAT, H CAT) lines are modelled in Moses, whether using the finite element approach or some other theory. I read through the Moses deals document, but there is insufficient explanation. Please clarify.
  • Modelling in &Surface menu

    I generated a model with four cylinders using the &surface menu and exported the model as a 3D diffraction type. My query is whether the model generated can be considered a single 3D diffraction body (please refer to the attached). Also, I would like…
  • Deafult -Ramp time in Moses

    Hi Georgina, what is the default Ramp time considered in Moses.
  • effect of "-SPEED" while computing RAO

    Hi Georgina, Does the "-SPEED" option while computing RAO have any effect on vessel RAO & Motions?
  • Post Processing in Moses

    Hi Georgina, Can you advise what is the significance of the command “IRREGULA” in the hydrodynamics post processing menu (given below FYI)?
  • Dynamic wave bending moment from MOSES

    Dear Bentley team, As we know for longitudinal strength, we take the wavelength of the wave equal to the length of the vessel for getting static wave bending moment and shear force. My query is is there a option a determine the dynamic wave bending…
  • Regarding wave trains and damping calculation

    Dear Bentley team, Query 1: I would like to know how to add Swell & wave trains in Moses for mooring and motion analysis. Query 2: Also i would like to know how to read the damping Matrix and damping values from Moses output inorder to compare…
  • How Spectral moments are correlated to RMS value while using multipliers to find maximum values when computing connector force statistics.

    In Moses, I performed a mooring analysis and computed connector force statistics. I noticed that the maximum values reported are multiplied by 3.72 to the RMS values. I looked on the forum for an explanation and found the responses presented below. …
  • How young's modulus is calculated in moses ?

    young's modulus AE showing when i input command @status cl_flex. i want to know how moses is calculation modulus of elasticity value. if there is any formula i want to know.
  • wave drift and wind force opposite in Moses

    Final2.rar Can anybody help me to explain why I am getting wind, current in one direction but wave drift and other coriolis force in opposite direction. I am using same angle for wind, wave and current.