• MULTIFRAME - Is modal analysis possible?

    Hello, in MULTIFRAME is modal analysis possible? Thanks and have a good day! Mauricio Pereira
  • All the section types have not been Defined

    Hello I have this problem in multiframe All the section types have not been Defined an error that I do not understand why it causes it, please I need your help
  • How to add an offset load to create a moment in Maxsurf Multiframe

    Hi im new to multiframe and im wondering if its possible to apply an offset load to generate a moment. The above image is a basic example of what im trying to achieve. ive been reading about the master/slave and joint linking to create a rigid body…
  • Multiframe Code Calculations and Member efficiency are not calculted and shown.

    Hi, I am using Multiframe Advance Suit and when I run model calculations. The multiframe shows deflections, moments/forces and stresses but it does not calculated member efficiencies as per Codes i.e AS4100 NZS3404 etc. Nor does it generate calculations…
  • Multiframe Sections Library - wrong units

    Something odd with the Sections Library. I have a simple model with 50x50x6 L sections and was getting odd results (tiny stress). Section properties for Area, kg/m, D, B are all as expected, but Ixx and Iyy are out by a mile. Showing 19357201.880cm4…
  • Multiframe Steel Member Sections Not Showing in Design Report

    Hello, Whenever I produce a Steel Design Report in Multiframe, the member section graphic just shows as a solid black square: Is there a way to get Multiframe to display the correct member section graphic? It was working fine for an earlier…
  • Patch + Member Offset behaviour [Multiframe]

    Hi, I am modeling a stiffened steel plate (horizontal flat steel plate, with attached bulb profile stiffeners for example)... Is it correct to model the patches (plates) and elements connected in their N.A as default? (see picture 1). Or should I be…
  • RE: Biaxial bending for CHS members

    Multiframe uses biaxial bending calculations for both section and member capacity. Can you please send an example of showing me which formula you used to cause such difference? By the way, which design code do you use? Many thanks.
  • RE: Multiframe 15.04 ... Who Supports it?? where can I download the 64 bit install.

    For anyone else who has such a problem, remember, the software fulfillment center is limited to users who have the role or permissions to download and install our products. We refer to this as the "Product Delivery - Download" role. Some organizations…
  • RE: Multiframe (basic) license

    The installer can be found on select.bentley.com/FulfillmentCenter choose "Offshore Structural Analysis" from the "Product Line" pull-down menu and you should see "Multiframe" at the bottom. Alternatively just type Multiframe in the search box and click…
  • RE: Multiframe 15.04 ... Who Supports it?? where can I download the 64 bit install.

    You can download software at https://connect.bentley.com/ using the Software Downloads link. There is a version 15.00.04.74 installer available for 64-bit operating systems. I am not sure that this will solve your problem and if the problem does persist…
  • Mass property input in custom sections - Multiframe

    Hi, I'm using Multiframe v8i (version 15.04) and I would like to run a self-weight analysis using custom (User Defined) sections. The problem is that I can't input a mass (the cell is greyed and I can't edit it) in the section property manager as…