• Tension and compression forces of member

    Hi, How can I get tension and compression forces of member on the SACS output file? Or If any member has fixity (111000) in its one end, is it possible to get tension and compression forces on the member? I am new at this software. Please help to find…
  • AutoSacs 6.1 BatchTB Not Creating in Windows 10

    Dear All, Anyone have idea or support tools for windows 10. AutoSacs 6.1 BatchTB Not Creating in Windows 10 export file of excel (ms office2010 32bits.)
  • WARNING DIGITS LOST (SACS)

    Dear Support, could you please clarify the meaning of the warning "MAX. SIGNIFICANT DIGITS LOST = 6 SOLUTION ACCURATE TO 8 DIGITS OUT OF POSSIBLE 15"? is it something we should worry particularly? when it happens I generally perform more checks, of…
  • Spectral Wind Fatigue

    Hai, I have run the analysis for Spectral wind fatigue. But there are error occur during analysis. This is my dynamic response input file Can someone help me on this.
  • Wind Turbine Pole Analysis

    Hello, I have a question regarding the fatigue analysis for Wind Turbine Pole. What is the step to do the fatigue analysis on that pole.
  • SACS Loadout Analysis

    I am new to perform Loadout Analysis in SACS. Client requirement is to perform only using SACS. How to initiate and key data to keep in the mind. Thanks.
  • RE: PSI ANALYSIS

    Thank you very much. I have a question in PSI INPUT. What's the means of Inner O.D & Inner W.T? Can I input the dimensions of inside pile(965x30t) in the Inner O.D & Inner W.T in this case? If can't, how to consider the inside pile in this case…
  • SACS Datagen file re-shuffles

    Hello All, I am currently using SACS 5.7V8i. I observed that after executing the analysis, Datagen file reshuffles. My load combinations get moved up n down. So i find difficult to cross check them . How this can be avoided?
  • Non-convergence of piles SACS Pushover

    When running an offshore platform pushover analysis I get a consistent error (ERROR-MAX. ITERATIONS EXCEEDED AT PILE JOINT "XX". I ran the model using pinned connection at the base of the structure and it runs fine, so the error has to do with the soil…
  • FEMGV With SELECT License Activated

    Hi, I am a new user try to use SACS FEMGV. I have SELECT License for SACS FEMGV and Activate it in License Managemnet Tools. When I start SACS then go to Program Launcher > Utilities > FE Model , FEMGV started failed and display " License period…
  • SACS RAO - strange output and input

    I am curious about RAO command in SACS Tow input file. See attached picture, I put RAO = 1g (m/s^2 /m) which is already base on unit wave amplitude (Wave height / 2). Unit wave amplitude is 1m. (Wave Height = 2*1m = 2m) Then, SACS should give…
  • tubular member UCs are different

    why are the max member(only tubulars) UC results from display different from report? for example, in precede, the member max uc is 1.11, but in report, the UC is only 0.88. See the following picture. Can anyone answer this question?