• SACS 3D Results Viewer - Joint Displacement

    Hi, In SACS V16, it seems the joint displacement labeling results are only available for the maximum out of all the load case selected (active). Unlikely to the max member UC that can be displayed for each load case selected, separate runs with the…
  • Curve of Downflooding Angle

    I have been asked to provide a set of curves I do not usually present as in a standard Stability Booklet. The required curves are to describe the heeling angle which ranges up to where the lower edge of a non-watertight opening becomes submerged. They…
  • Lightship Weight

    I have Lines plan. How can I find out lughtship weight of this ship in maxsurf? Thanks in advance!
  • SPAN & Physical Member commands in SACS

    Hello all, There are some ambiguities for me about the use of SPAN and PHYSICAL MEMBER commands in SACS. Consider the following simple senario: Imagine we have a main deck beam (say HEB600), on top of which stringer beams( say IPE200) are running…
  • RE: Deflection problem in connect edition

    Karthikeyan, We have not received any reports of issues viewing the deflected shape and/or joint displacements for SACS 10. I would recommend submitting a help request: http://apps.bentley.com/srmanager/ProductSupport You can attach your analysis…