Hello,
How to input different thermal conditions for different type of lines(hot oil, steam etc) in single project.
Since we define them at the start of project which applies for all piping in the file.
Is input grid only the option for it.
Please reply.
Hello Vishal,
There are 2 options:
1. Use the Press/Temp/PipeID tab on the input Grids.
or
2. Select piping, use Modify> Operating Pressure and Temperature.
Both of these commands will modify the Temperatures in your model as needed.
Regards,
Mike Dattilio
Bentley Product Advantage Group Analyst
AutoPIPE Product Line Bentley Systems, Inc.
===================================================
PS. Sounds like you are new to AutoPIPE, suggest the following WIKI here.
Answer Verified By: Vishal Girase