Hi gentlemen,
Just today my boss asked me to draw a vessel but I have a problem.
Basically, apart the nozzle and others fitting, this has a cilinder shell + reducer ( from 24" to 12") and a flange in the end. When put reducer between flange and shell the software says that one diameter is missing and has to be change with cone. I did it but then when put the flange on cone side the software says "flange must be on the shell" . How I can resolve this.
Thanks
Hello Giuseppe
It is difficult to answer this issue without looking at images describing showing what is being modeled or the model itself. Please log a Bentley Service Request and attach your model file, along with images to explain what is happening for review.
Thanks,
Jessica Alegre
Mechanical Application Engineer