Autopipe Vessel Tank

1. Yes AutoPIPE Vessel can model a tank that is 27 meters (27,000 mm) tall. I am not aware of the design limitation you specify. 
2. You are able to model a man hole in the tank roof. 
3. There is some improvements needed in order to specify structural shapes in AutoPIPE Vessel. But I have found the procedure below the best to specify shapes for your supported roof once you have specified all the materials for your roof shapes:

Double click the Number of Sides cell and input the for example 8 and click on the Quantity cell in the Rafter Group area. This should automatically update the quantity of the rafters for both A and B groups.

Select a structural shape from the shape selection drop down list
Select the size for that shape from the shape size drop down list.
Double click the Tag No. cell for the Girder Group and click on the Apply button in the Select and Apply area.

Do the same for rest of your girders, rafters, and columns.

I would suggest you go through the tank and pressure vessel training that is available on demand at learn.bentley.com.

1. Yes AutoPIPE Vessel can model a tank that is 27 meters (27,000 mm) tall. I am not aware of the design limitation you specify. 
2. You are able to model a man hole in the tank roof. 
3. There is some improvements needed in order to specify structural shapes in AutoPIPE Vessel. But I have found the procedure below the best to specify shapes for your supported roof once you have specified all the materials for your roof shapes:

Double click the Number of Sides cell and input the for example 8 and click on the Quantity cell in the Rafter Group area. This should automatically update the quantity of the rafters for both A and B groups.

Select a structural shape from the shape selection drop down list
Select the size for that shape from the shape size drop down list.
Double click the Tag No. cell for the Girder Group and click on the Apply button in the Select and Apply area.

Do the same for rest of your girders, rafters, and columns.

I would suggest you go through the tank and pressure vessel training that is available on demand at learn.bentley.com.

Hi Luke Andrew,

Sorry I'm not really clear with your answer, could you please see my comment below:

1. I didn't found any option on autopipe to design more than 25m tank height, please see screenshot below.

Please advice..

2. Same cases as no.1

Please advise, if you have more sample file/project storage tank for my reference (that has roof manholes and nozzles) it will good.

Thanks,

Nuzul Furqony

Hi Luke Andrew,

I just got the answer for my question no.2. Thanks.

You are not limited to what is listed in that drop down. You can input your 27 m (27,000 mm) value.