in Auto Pipe vessel
I could not add a shifted elliptical head (shifted axis ) , even the move action is not responding , any one has faced the same problem ?
please explain in more details what you intend to do. You may use "Thickness Alignment" under "Geometry" for head and shell thickness alignment.
you can see the elliptical head in left side, it still keep the first center line, I couldn't align it with the vessel after the radius decrease
please send your model file.
it can't be uploaded , I chosen a vessel with certain external diameter , split it , reduced the diameter , selected a certain shell convert it to a cone , by mistake i removed the elliptical head , saved it , then tried to put again the elliptical head , the problem appeared
If you look in the Geometry column, in the list view on the left, presumably the new elliptical head is placed after the boot head (#9), this is not correct.To fix the issue:Remove the head,Select the small cylindrical shell,Go to Edit menu > Insert a copy > After selectionIn the "Component" Dialog:Select "Elliptical head",Select "Head/Cone swung 180°",Click on the OK button.The head should be correctly placed now.