How to add pipe clip in autopipe vessel

How to add piping clips and structural clips in autopipe vessel software

Parents
  • Hello Sir

    1. Through the Piping Clip or Structural Clip dialogue: Menu >Insert > Piping Clip or Structural Clip
    2. Importing an excel sheet or .doc document, which must be based on the correspondent template.
      1. Template Path: Customizable Files has a folder (Menu>File>Preferences>Customizable File Path) called Report. The template’s name is “Clip” (Clip.xls and Clip.doc)
      2. Fill the template as described in Step 3.
      3. Import the external file: Menu>Import> Piping Clip or Structural Clip.
    3. Independently of the method chosen, fill the table as follows:

    Standard

    Designation

    Level/Dist.

    Diameter

    Orient.

    Ref. Axis

    Offset

    Dist. Apart

    STC 04 90 83

    G

    G1 -1

    -1500

     

    156

     

     

     

    STC 04 90 83

    G

    G1 -2

    -1500

     

    191

     

     

     

    STC 04 90 83

    G

    G1 -3

    -1500

     

    226

     

     

     

     

    • Standard: must correspond to a Standard present in dimgus.
    • : must correspond to a unique Nº in dimgus.
    • Designation: unique identification tag of the clip.
    • Level/Dist: distance to the TL.
    • Diameter: diameter of the pipe (only available only for Structural Clips). Its center is located along the orientation line.
    • Orientation: in the transversal plane, angle from the 0º of reference to one side of the clip.
    • Axis: must be defined along with Diameter. distance from the axis of the vessel to the center of the pipe.
    • Offset: perpendicular separation from the orientation angle.
    • Apart: separation between the clip and its duplicate, who will be located before.
Reply
  • Hello Sir

    1. Through the Piping Clip or Structural Clip dialogue: Menu >Insert > Piping Clip or Structural Clip
    2. Importing an excel sheet or .doc document, which must be based on the correspondent template.
      1. Template Path: Customizable Files has a folder (Menu>File>Preferences>Customizable File Path) called Report. The template’s name is “Clip” (Clip.xls and Clip.doc)
      2. Fill the template as described in Step 3.
      3. Import the external file: Menu>Import> Piping Clip or Structural Clip.
    3. Independently of the method chosen, fill the table as follows:

    Standard

    Designation

    Level/Dist.

    Diameter

    Orient.

    Ref. Axis

    Offset

    Dist. Apart

    STC 04 90 83

    G

    G1 -1

    -1500

     

    156

     

     

     

    STC 04 90 83

    G

    G1 -2

    -1500

     

    191

     

     

     

    STC 04 90 83

    G

    G1 -3

    -1500

     

    226

     

     

     

     

    • Standard: must correspond to a Standard present in dimgus.
    • : must correspond to a unique Nº in dimgus.
    • Designation: unique identification tag of the clip.
    • Level/Dist: distance to the TL.
    • Diameter: diameter of the pipe (only available only for Structural Clips). Its center is located along the orientation line.
    • Orientation: in the transversal plane, angle from the 0º of reference to one side of the clip.
    • Axis: must be defined along with Diameter. distance from the axis of the vessel to the center of the pipe.
    • Offset: perpendicular separation from the orientation angle.
    • Apart: separation between the clip and its duplicate, who will be located before.
Children
No Data