• Calculation problems of vessel on skirt—tailing lug,minimum thickness of skirt ,access hole in skirt for code ASME

    1. 711 TAILING LUG : The tailing lug is close to the anchor but the weld area has not been identified => the lug is not considered as being on the anchor. How to identified the taling lug on the anchor,so we do not need calcuate the local stress in…
  • 17. How to add a skirt to a pressure vessel?

    Applies To Product(s): AutoPIPE Vessel Version(s): ALL Area: modeling Date Logged & Current Version July 2020 41.05.00.008 Problem: How to add a skirt to a vessel? Solution: Select the vessel and select…
  • VERTICAL PRESSURE VESSEL - ANCHOR CHAIR CALCULATION

    Hi All, While running the calculation for vertical pressure vessels supported on skirt, we have encountered an issue related to the top plate thickness of the anchor chair. We are selecting the anchor chair dimensions for a specific company STANDARD…
  • AutoPIPE Vessel: Guide support

    Dear all, How much add value of stiffness in guide support tab during design of skirt support tall tower? If I use fixed lug support as 0 stiffness, And after the same lug I need to design for upper portion of equipment with horizontal reactions…
  • 39. How to model a skirt stiffener in AutoPIPE Vessel

    Applies To Product(s): AutoPIPE Vessel Version(s): ALL Area: Modeling Date Logged & Current Version June 2018 40.06.00.07 Problem: How to model a skirt stiffener in AutoPIPE Vessel Solution: Release AutoPIPE…