You are currently reviewing an older revision of this page.
How do I apply more than 1 piping code into an AutoPIPE model?
We sinceerly apologize for the inconvenience, but as a limitation to the current version of AutoPIPE you can only perform an analysis on the entire system with 1 selected piping code. There is an enhancement logged (CAE-CR-3582) to allow models to be analyzed per 2 codes at one time.
Suggest analyzing the model or creating multiple models each one using a different piping code. Then select, review, and print the output for just the applicable run of pipe per the required code.
Example, run analysis using ASME NB Nuclear piping code, select the node points that must be analyzed per ASME NB code, create an output report "Limit results to highlighted points", and repeat above steps after selecting a different piping code, etc...
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!