Note: if an enhancement or defects has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.
A. If an enhancement has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.
B. Regardless of what code version is available, the NRC designs are only approved to what code version, see link:
http://www.nrc.gov/reading-rm/doc-collections/cfr/part050/part050-0055a.html
Enhancement 1067717:
Update ASME Section III (NB, NC, ND) for 2019 code changes
Development Project: TBD
Defect 1068007:
Update N 755-1 to N 755-4
Development Project: TBD
Defect 746198:
Warning W2143-45 appears and cannot be removed
Description:
For ASME ND 1983+1983W addenda and earlier, AutoPIPE incorrectly reports a warning during model consistency check that the hot yield is below 1.0 psi and may affect the equation 9 allowable. Not only does the hot yield not affect the equation 9 allowable for these editions, but the user cannot modify the hot yield, so this warning cannot be resolved.
Avoidance:
Since this warning is not applicable to ND 1983+1983W addenda and earlier, it can be ignored.
Development Project: TBD
Defect 354776:
Class 1 header moments use incorrect sign
Description:
Signed moments (e.g. GR, T1, P1) are properly rotated according to Class 1 tee moment orientation, however the signs are not always correct. It is required for pre-verification stresses that the signs are correctly established.
Avoidance:
Align the tee legs along the global axes.
Development Project: TBD
Enhancement 333806:
Update ASME Section III (NB, NC, ND) for 2015 code changes
Development Project: TBD
Enhancement 207133:
Update ASME BPV-III-1-NB (1972 - 2013) flow chart in programs help documentation
Development Project: TBD
Enhancement 74287:
Select equation 10a in the stress summary
Development Project: TBD
Enhancement 71139:
2013 ASME NB Code
Development Project: TBD
Enhancement 139108 (CAE-CR-11110):
Provide functionality to add multiple range reduction factor for ASME NC/ND
Description:
Currently AutoPIPE only provides the user with a single value of range reduction factor to be defined under Result Model Options for ASME NC/ND. It is required that the user should be able to define range reduction factor based combination or load case.
The option for the user to be able to provide number of cycles instead of range reduction factor can also be implemented. Internally AutoPIPE would convert the number of cycles to range reduction factor.
Development Project: TBD
Enhancement 138723 (CAE-CR-10680):
Add ASME Nuclear 2011 Edition
Description: Add ASME BPVC Section III NB, NC and ND 2011 edition to AutoPIPE.
Development Project: TBD
Enhancement 138332 (CAE-CR-10227):
Add ASME NB, NC & ND 2010 piping code
Development Project: TBD
Enhancement 130790 (CAE-CR-6978):
Update ASME NB NC and ND code to 2008 addenda
Description: Up date the ADLPipe ASME routines to 2008 addenda codes (2007 clean code).
Development Project: TBD
See Also
Piping Codes Enhancements & Defects