Item 1: Set up a non-code combination to print 0.3*gravity when axial displacement at a support exceeds 1/8" in thermal load case
Item 2: Add Pressure and Hydrotest load cases to a Non-Code combination
Item 3: Change default Combination Names
Item 4: Modify existing User defined combination names
Item 5: Change the order / sequence of listed combinations
Item 6: Automatically find the MAX load case from a group of load cases
Item 7: Is this a Valid combination?
Item 8: Why the initial case for occasional loads do not change?
Item 9: Check which sign combination together gives the worst stresses and restraint forces
ex. for applied F1, F2, M3, M4, the worst combination could be -F1, +F2, -M3, +M4, etc.
Item 10: Add the effects of movements from sources other than thermal loading
Item 11: Disable all Non-code combinations in the analysis and reports?
Item #12: Apply a factor to a load case, 1.2G+1.5E
Item #13: How does friction affect Non-code User combinations?
Item #14: Why are my Code / Non-code combinations not being printed in the output report or results grids?
Combination Load Cases (Tools> Combinations dialog)