You are currently reviewing an older revision of this page.
Note: if an enhancement has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.
Description:
Soil properties applied to selected points is updated to the last Soil ID that is modified using "Modify > Properties of Soil Identifier" command.
Steps to Reproduce:
1. Open Walkthru model2. Insert soil properties on a range and call it SOILA
3. Insert soil properties on a second range different than the first range and call it SOILB
4. Select the range of points with SOILA and execute "Modify > Properties of Soil Identifier"
5. Select SOILB from the Soil Identifier on the Soil Properties dialog and Press OK
Note that on the Soil tab of Review Component Data grid, the range with SOILA is now showing SOILB as the soil applied to this range. "Modify > Properties of Soil Identifier" should only allow to modify the soil properties of selected Soil Identifier, and soil applied to different ranges should not be changed.
Avoidance:
Update the soil properties for the soil ID that is applied to the selected range only
Corrected Version: TBD
Provide option to increase number of decimal precision on support calculator dialog.
For long runs of pipe with large diameter bends laying on the ground an option of continuous support with friction would alleviate the need for a soils analysis for above grounds piping or closely spaced supports on segmented bends.
See the following WIKI here
Corrected Version: TDB
Apply Soil Overburden Loads and Seismic Wave Data to the following codes:
ASME B31.1, ASME B31.4, ASME B31.8, CSA-Z662, EN Code, ISO14692
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!