You are currently reviewing an older revision of this page.
Note: Bentley PlantFLOW is compatible Windows XP, Windows Vista, Windows Vista x64, Windows XP x64, Windows 7, Windows 7 x64.
1. Download PlantFLOW
a. Open internet explorer application
b. Select link here for AutoPIPE download instructions, however the same steps can be used to search for and download Bentley PLantFLOW.
Be sure to download both PlantFLOW and Bentley IEG at this time:
2. Install PlantFLOW
This new version of PlantFLOW is able to run on 32 bit and 64 bit versions of Windows XP, VISTA, Win 7,
Note: Bentley cannot be held responsible for results from an installation of this software on an Operating System that is not specified in the application's read-me file. Installing and all output results from Bentley PlantFLOW on these other OS is at your own risk.
Some preliminary tests have shown that the application will install and appears to be functional on Win 8 & higher. These OS have not been fully tested and using the application on these versions of Windows is subject to the disclaimer above.
3. Download Bentley IEG Download Bentley IEG
Use the same procedure above to download Bentley IEG 02.00.20.01
4. Install Bentley IEG(This is a separate install and is required).IEG must be installed by user with Admin privileges and cannot be pushed over a network connection. Please confirm you are logged on as an admin user, do not assume
6. Set-up License
6. Start PlantFLOW software
Application indicates Plus license in use Application is in DEMO mode
See Also
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!