You are currently reviewing an older revision of this page.
Important: Bentley PlantFLOW is compatible with:Windows XP, Windows Vista, Windows Vista x64, Windows XP x64, Windows 7, Windows 7 x64.This does not mean that the software cannot be run on another operating systems not specified in the readme file, but that it has not been tested/certified by the CAE development team to be installed on another OS. The user can try to install the application on any OS. However, Bentley cannot be held liable for results or provide technical support for installation of AutoPIPE on untested systems.
1. Download PlantFLOW
File a Bentley service request asking a link to install the application.
2. Install PlantFLOW
This new version of PlantFLOW is able to run on 32 bit and 64 bit versions of Windows XP, VISTA, Win 7,
Note: Bentley cannot be held responsible for results from an installation of this software on an Operating System that is not specified in the application's read-me file. Installing and all output results from Bentley PlantFLOW on these other OS is at your own risk.
Some preliminary tests have shown that the application will install and appears to be functional on Win 8 & higher. These OS have not been fully tested and using the application on these versions of Windows is subject to the disclaimer above.
3. Download Bentley IEG Download Bentley IEG
Use the same procedure above to download Bentley IEG 02.00.20.01
4. Install Bentley IEG(This is a separate install and is required).IEG must be installed by user with Admin privileges and cannot be pushed over a network connection. Please confirm you are logged on as an admin user, do not assume
6. Set-up License
6. Start PlantFLOW software
Application indicates Plus license in use Application is in DEMO mode
See Also
Bentley AutoPIPE