You are currently reviewing an older revision of this page.
When starting AutoPIPE, the following appears:
---------------------------Microsoft Visual C++ Runtime Library---------------------------Runtime Error!
Program: C:\Bentley\AutoPIPE V8i SELECTseries5\autopipe.exe
This application has requested the Runtime to terminate it in an unusual way.Please contact the application's support team for more information.
---------------------------OK ---------------------------
There is very little that can be done with a model that has this error message displayed on start-up. The only options are:
Known issue #1: During a Copy / Past procedure involving segments with Distributed Weight in AutoPIPE 09.06.00.xx or lower. Workaround, update to AutoPIPE V8i 09.06.01.10 or higher. continue working in the newer version or use the Save As feature to save back to a previous version of AutoPIPE. this Saving back to a previous version will fix the model database.
Known issue #2: Incorrect pipe properties were set for sequential node points (ex. points AG05 and AG06)
1. Revert back to a previous version of the model DAT file that did not have a problem when being opened by the application.
2. Open the folder location, locate the *.BAK file, copy it to another folder location, change the file extension from BAK to DAT and try to open this new file with AutoPIPE.
3. Start AutoPIPE, create a new model, select File> Insert model> AutoPIPE model (*.dat), Hint: Select the option "Use Actual Coordinates" to paste using real world coordinates. 7 out of 10 times this will rescue the model geometry. However, the model Temperature / Pressure data and other minor changes will need to be re-applied. Inspect the entire model before use in production.
4. Log a service ticket, attach a ZIP file containing the entire folder contents where the model is stored and see if the CAE development team can repair the model. Be sure to include any and all information that was performed in the model before this issue occurred.
Warnings, Errors, Crashed, Confirm Messages in AutoPIPE
Bentley AutoPIPE
411079