How to install AutoPIPE V8i 09.06.00.xx ?
Note: For those installing the application on Win 7 please see "Installing AutoPIPE on Win 7" section below before continuing,
1. This procedure assumes that Select Server XM has been install and configured, If not please contact the license group to assist you.
2. Must log onto user's computer with full Administration rights.
3. Suggest that AutoPIPE V8i is installed while accepting all the default settings.
a. Prefer that the application is not installed over a network connection; suggest that the EXE file is on the users system before starting the installation.
b. If you have already installed AutoPIPE V8i, using add/remove programs uninstall:" all previous versions of AutoPIPE" PCF to NTL translator" ADLPipe to NTL translator" Bentley STRAIT
c. Navigate to the EXE file download using the procedure above.
Default: C:\Downloads \Bentley \
d. Double click on the "ap09060015en.exe" to start the installation process.Note: Be patient while the application is installing as it is checking to verify programs already installed, verifying drive space, etc.. there may be periods when it appears nothing is happening. Give the system time. In the event the installation stops a warning / error will be presented. Just follow the prompts and be patient. Highly recommended that all applications are closed during the installation process. On average it will take 6-8 min to install everything.
Wait for the application... it is working in the back ground
the following may or maynot appear, just press OK button
Only perform these steps if installing on Windows 7 and the default setting above did not work, otherwise continue to next section:
Windows 7 has some features and settings that may need to be adjusted in order to install / use AutoPIPE V8i correctly. Please see the following one or more suggestions.
d. Modify Compatibility settings: Run program as Admin
First try Step #3 above, if does not work, open the same dialog above, and also check on “Run this program as an administrator”.
Try the installation process again.
e. Error occurs when installing: Unhandled Exception Error number 0x80040707:
If you're getting this error message as part of an installation or upgrade routine, here's one of the easiest ways to circumvent the problem:
f. Turn off DATA execution
Turn off data execution protection before installation of AutoPIPE
g. Inspect background processes
Some applications that are running in the background may cause problems when trying to install the application. Verify the following types are turned off during the installation process:
Note: If you are still having installation problems on Win 7 after trying all the above suggestions, please send your computer’s information.
Start> Programs>Accessories> System Tools> System Information. After the program has been opened, select File> Save> save file and send me a copy of systemname.NFO file for inspection.
Also, perform the following: start DOS command, c:\> Dir /s /o /ogne>systemname.txt, send me a copy ofthe systemname.txt for review. This file may be large and can be shrunk by adding it to a ZIP file.