You are currently reviewing an older revision of this page.
Logged November 2014, current version = AutoPIPE V8i 09.06.01.10
How can I review to see if there is a default material with chromium content for CM, LC, MC, IC, and CR, that are offered by pull down when modeling a B31.4 system?
There are 2 methods of reviewing the existing Spec section of the Material library:
1. Please see the following AutoPIPE help section:
Help > Contents> Contents Tab> Reference Information> Libraries> Code Dependent Pipe Materials> Select the Pipe material Library used in your model (ex. B314-12.LIB code materials, and review the table information for "Referenced Standard Information" (ex. CS) per material name (ex. 5LX-X46)
Then refer to the following help section, Libraries> Standard Pipe Materials> Select the Pipe material library in your model (ex. B313-04.LIB Standard Materials), and review the meaning of the data from the previous table (ex. CS = Low Carbon).
2. Select Tool> Library> Set Table Name = Specs, Library name = (select the material library used in your model, ex. B314-12), Action = Scan, and press OK button.
See the AutoPIPE Report Viewer that will display the library information:
Scan the entire report to review the standard material names and respective Spec names.
Again Select Tool> Library> Set Table Name = Material, Library name = (select the material library used in your model, ex. B314-12), Action = Scan, and press OK button.
Again the AutoPIPE Report Viewer that will display the library information:
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!