You are currently reviewing an older revision of this page.
How to print parts of the model highlighted red color only in the AutoPIPE output report?
With a model open in AutoPIPE, analyze the model. Afterwards, press Select> select node points, segment, components, etc. as required in the model, press Results> Output Report> enable (check ON) "Limit results to highlighted points" (see online help for details on this option), continue with enabling additional sub reports as need, and press OK button. Note: you will need to select the over stress points shown as red in the code compliance color, consider using the Results> Filter command in addition to the Select command for highlighting parts of the model.
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!