You are currently reviewing an older revision of this page.
How to print out / save the AutoPIPE code stress color map?
The Code Stress color map can be exported from AutoPIPE using one of the following methods
1. Run Analyze All command on the current model open in AutoPIPE
2. Select Results> Code Stresses> on this dialog see the "Output Destination" drop down listing (press help button for details):
3. Press OK button to accept the "Output Destination" selection, the result swill be output to that selection made.
4. If "Screen" was selected, the following would have been displayed:
From this point one could use screen grab techniques to Zoom and Pan the model to a certain location before taking a screen grab. The screen grab can then be pasted into another program as needed.
If "Printer / Plotter" was selected, AutoPIPE will prompt you to select a valid printer to print the image (hint, using a PDF printer allows the out put image to be combiined with other PDFs.
If "File" was selected, AutoPIPE will prompt you to select a *.PLT file for the output image.
If "BMP" was selected, AutoPIPE will prompt you to select a *.BMP file for the output image.The image file can then be imported into another application as needed.
Bentley AutoPIPE