AutoPIPE Wiki 06. How to Import Nozzle Loads from AutoPIPE into AutoPIPE Vessel

06. How to Import Nozzle Loads from AutoPIPE into AutoPIPE Vessel


	Applies To

	Product(s):	AutoPIPE Vessel
	Version(s):	All
	Environment:	N/A
	Area:	Import
	Original Author:	Bentley Technical Support Group
	Date Logged & Current Version	Mar. 2015 33.02.02.04

Question:

How to Import Nozzle Loads from AutoPIPE

Answer:

Import Nozzle Loads from AutoPIPE

1. From AutoPIPE Vessel, select Import > Local Loads on Nozzles from AutoPIPE to display the Open dialog.
2. Navigate to the xml file exported from AutoPIPE, then press Open to display the Local Loads on Nozzles from AutoPIPE message dialog.
3. Press OK to erase the local loads on the existing Nozzles in the AutoPIPE Vessel model.
4. The Local Loads on Nozzles from AutoPIPE dialog displays.
5. Press OK.

Example:

AutoPIPE XML file import into AutoPIPE Vessel

Note:

Values shown in AutoPIPE Vessel are due to both nozzle orientation and unit conversion. In this example, Nozzle is in the top position to simplify orientation changes. Then considering only unit conversions, results are correct as shown below:

1 dekanewton = 2.24808943 pound-forces
1 daN = 2.24808943 lbf
1 dekanewton = 10 newtons
1 daN = 10 N

XML file	factor	AutoPIPE Vessel
Sustained = Gavity {1}
Fx 0.00	0.4448222	0.000 daN
Fy 0.00	0.4448222	0.000 daN
Fz 180.38	0.4448222	80.237 daN
Mx 0.00	0.135582	0.000 daN.m
My 41.59	0.135582	5.639 daN.m
Mz 0.00	0.135582	0.000 daN.m

Thermal = T1 {1}
Fx 0.00	0.4448222	0.000 daN
Fy 0.00	0.4448222	0.000 daN
Fz 0.00	0.4448222	0.000 daN
Mx 0.00	0.135582	0.000 daN.m
My 0.00	0.135582	0.000 daN.m
Mz 0.00	0.135582	0.000 daN.m

Occasional = GT3P3E1{1}
Fx 36.08	0.4448222	16.049 daN
Fy 0.00	0.4448222	0.000 daN
Fz 162.35	0.4448222	72.217 daN
Mx 0.00	0.135582	0.000 daN.m
My 29.41	0.135582	3.987 daN.m
Mz 0.00	0.135582	0.000 daN.m

06. How to Import Nozzle Loads from AutoPIPE into AutoPIPE Vessel

Question:

Answer:

Import Nozzle Loads from AutoPIPE

Example:

See Also