You are currently reviewing an older revision of this page.
I have a question regarding 1000m radius bend in Autopipe. I would like to add points on the bend. What is the easiest way as I have to insert points at 6m intervals.
There is no command in AutoPIPE to split/insert a bend with multiple points. However, please see the following options available based on the version of AutoPIPE being used.
AutoPIPE V8i 09.05.xx.xx and Lower:
Option #1: Create a miter bend with as many cuts as desired. Please see the following AutoPIPE help section for details: Help > Contents> Contents Tab> Modeling Approaches> Modeling Approaches> Bend> Miter Bends> Model 2: 3 Cuts - Widely Spaced. Using Excel, calculate all
Option #2: Create the bend in AutoCAD and manually transfer each node point (DX, DY, DZ) coordinates to AutoPIPE as new bends are added.
AutoPIPE V8i 09.06.xx.xx and higher:
Option #1: All options available in AutoPIPE 9.5 and lower
Option #2: Create the bend in AutoCAD and import file using the new Import AutoCAD file procedure.
Option #3: (Preferred method) Create a ring main using the new Ring Main Wizard, after the ring main has been created, cut/copy/paste/move it to the correct location in the model
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!