You are currently reviewing an older revision of this page.
Please see the following AutoPIPE help section: Help > Contents> Contents Tab> Command Reference> Insert and Modify commands> Component Reference> Xtra Data> Cut Short
From Online help:
The Xtra Data/Cut Short image\t-ccutsh.gif command enables the user to insert/modify a cut at the current point so that a length of pipe preceding the cut can be deleted (cut-short), or inserted (cut-long) and the pipe ends joined, thus allowing longitudinal thermal displacements of the pipe due to the temperature change between the ambient and operating conditions to be counteracted.
See online help for complete data and Recommended procedure for performing cut short analysis
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!