You are currently reviewing an older revision of this page.
How does a QA&R user install AutoPIPE?
Note: If you are part of the QA&R program, any installation from a downloaded file for AutoPIPE or ATS is strictly forbidden and does not constitute a valid installation or verification. All QA&R user must install the applications from the CDs received from Bentley systems QA&R manager.
See the following steps required for a valid QA&R installation of AutoPIPE:
Step #1: Get the official QA&R CD that was mailed from Bentley.
Step #2: Install the CD into the computer where AutoPIPE is to be installed.
Step #3: Use ‘My Computer’ to browse to the CD and double click on the file, Quickstart_AutoPIPE.pdf.
Step #4: See Chapter 2: Installation Guide, go to the page for "Install from CD"
Step #5: Perform the instructions as written in order to install the application from the CD.
Step #6: Scroll down a few pages in the document to see a listing of screen shots that will be presented, ending with pressing the Finish button, shown below:
Step #7: Before starting AutoPIPE it must be licensed, see the document section on "License Setup Guide". there are 2 options. Perform the steps required for the option being used.
a. Select here for information to find Bentley On-site Admin.
b. Select here for information to find SELECTserver name and Site ID
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!