1. All Bentley applications are available for download using the Software Download website.
2: If you are part of the QA&R program, any installation from a downloaded file for AutoPIPE or ATS is strictly forbidden and does not constitute a valid installation or verification. All QA&R user must install the applications from the CDs received from Bentley systems QA&R manager, click here for details. Other applications that are not part of the QA program (ex. OpenPLANT Isometric Manager, Dashboard, Navigator, etc..) can be downloaded and installed as needed.
3. Can I download AutoPIPE's full ATS program? see WIKI here
4. Does an error appear, if yes, check the Cloud service Status here, if software downloads is green, please clear your browser cache or try a different browser.
Select the following settings:
a. Product Line = Pipe Stresses and Vessel Analysis
b. Brand = AutoPIPE or AutoPIPE Vessel
c. Press Apply button
AutoPIPE is available in 3 different versions (i.e. Standard, Advances, Nuclear) and 1 add-on (KHK2 Add-on). These versions and add-on are controlled by the licensing inside of the application. Therefore, only need to download one version of the software, always select the first tile labeled AutoPIPE. Again, all the feature are installed, the license selection from with in the application controls the feature availability.
A. Filter - Make changes to the drop-down filters as needed to be applied to the list of available software
Note: Products containing the Luxology rendering engine can no longer be distributed
B. Dependencies - pressing the carrot at the start of a line will display a list of dependencies available for that software. These are separate downloads and separate installation procedures that are performed after installing AutoPIPE.
C. Details and Readme - pressing the "i" balloon will open a dialog that indicates additional details. These details contain a link to the respective Readme file on Bentley Communities
D. Download button - press the download button to download the respective line item. Be sure to press Download button for each line item to be downloaded.
E. At this time, AutoPIPE is only available as a 32 bit application. The development team is updating the application to a 64 bit version.
After pressing the Download button, depending on your browser, a small box may appear:
A box will appear at the bottom of the screen, press the "Save" drop down listing and select "Save-As", and save the file to your desk top or other folder location.
Note: the file name above may-not be the same, this name will mirror the version selected for download. Suggest to SAVE the application to the computer before installing.
A box will appear at the bottom of the screen, where the application is automatically being downloaded. press the drop down indicator on the right and select "Show in Folder" to locate the software being downloaded.
Note: the file name above may-not be the same, this name will mirror the version selected for download.
After the download has been completed, See the appropriate link below for installation instructions. Again, remember to install all programs downloaded, they are separate installations.
How do I download, install, and license AutoPIPE?