AutoPIPE V8i 09.03.02.05

137118

ASME NB, NC and ND combined stress may be non-conservative for skewed pipe

137113

Tee header SIF is incorrectly used for branch in Japanese JSME 2005 code

137157

Reinforced tee B2r < 1.575 and C2r < 2.1 are incorrect for NC/ND 2003 and later

136992

Stress ISO: Metric DXF borders corrupt the file during DXF export

AutoPIPE V8i 09.03.01.07

137074

SAM as Reverse dynamic gives zero SAM stresses in NB rev.dyn summary

137083

Pulled bend flexibility factor is conservatively set to 1.0

137084

Maximum DT1 and DT2 stress is not used for tee in pre-verification report

137040

Abutting bend stress indices are too conservative for pipe thickness < 3/16"

137069

B2 is used instead of B2' for girth BW with thickness change for Rev Dyn Summary

137071

NC/ND 2004 tee stress for reverse dynamic stress summary is conservative

137049

Flange report pressure rating class = *****

137051

Exported DXF file is corrupted

137044

Cannot run time history if a previously used THL file is not in model folder

AutoPIPE V8i 09.03.00.08

137006

Branch Type Tee SIFs and stress indices for JSME code are using NC 2004 values

137008

Problem with entering OTHER tee for JSME code

137009

Abutting elbow C2 index is using NB 1992 girth weld C2 formula for earlier years

135993

Changing pipe material in the input grid does not update thermal expansion alpha

137144

ASME NB 1980+1982 Addenda is mislabled as ASME 1980

137002

ASME NB/NC/ND OTHER tee stress indices maybe incorrect

137003

Eqn.8 & 9 stress summary may be incorrect at plus side of tee for NC/ND 2004

135698

ASME NB Thermal Ratchet shows Delta-T1 range from last load set pair

135306

Moment summation at the tee for ASME NB ignores moment sign for second leg

135837

SAM Axial stress results are zero for ASME ND code 94 or later

135838

Incorrect MSRS analysis results when flexible joint or nozzle elements used

135841

ASME B31.3 App P option causes different results in multiple load sets

135723

Negative force/disp/gross disc. or cut short may cause incorrect stresses

135731

Tee data switched when rigid options are inserted on a branch

135796

ASME NB Equation 9 Allowable may change based on last load set pair

135799

Transition weld SIF uses thickness at plus side of the joint

135812

Some pipe properties for plus point is used for minus point for ASME NB, NC&ND

135343

Allowable Stress and Design Intensity is incorrect for few materials in ASME1986

135356

Reinforced tee B2b & B2r stress indices are set equal for NC/ND 2003-2004 code

135637

Problem with tee run moment summation for unsigned SAM cases

135638

Moment summation incorrectly applied to reverse dynamic loads for NC 1972-1980

135690

B2' = 1.5 is always used for Socket welds for NC/ND 2001 and later

135691

C2 should not be set to 1.0 when t < 0.237 in. for NC/ND 2001 and later editions

135693

ASME NB 1989 socket weld indices for Cx<=0.75tn are always used for later years