01. How to set up a non-code combination to print 0.3*gravity when axial displacement at a support exceeds 1/8" in thermal load case in AutoPIPE?

Applies To
Product(s):	AutoPIPE
Version(s):	ALL;
Environment:	N/A
Area:	Combinations
Original Author:	Bentley Technical Support Group
Date Logged & Current Version	Nov. 2016 10.01.00.09

Problem:

How to set up a non-code combination to print 0.3*gravity when axial displacement at a support exceeds 1/8" in thermal load case?

Solution:

We apologize for the inconvenience, but there is no mechanism to have a combination set up based on a value result in another combination.

You can filter the output report based on values (see Results> Filter Criteria) , but you would still need to manually create the combination that can be enabled to be printed or not (see Tools> Combination> non-code tab> print option).

01. How to set up a non-code combination to print 0.3*gravity when axial displacement at a support exceeds 1/8" in thermal load case in AutoPIPE?

Problem:

Solution:

See Also