Bentley Communities
Site
Search
User
Site
Search
User
Product Communities
AutoPIPE
AutoPIPE Wiki
W2143-7: The joint information of User SIF or flange will be ignored at following point(s) warning message in AutoPIPE
Sign In
-
Pipe and Vessel Stress Analysis - Wiki
-
.Bentley AutoPIPE
+
a. General Information about AutoPIPE
+
b. NEW User Guide for AutoPIPE
+
c. Technical Support - AutoPIPE
+
d. Download - Install - Release Notes - AutoPIPE
+
e. Features and Bugs in AutoPIPE
+
f. License AutoPIPE -
-
g. System Messages: Warnings, Errors, Crashed, Confirm, etc.. in AutoPIPE
"1 Interrupted Action" messages displayed while coping AutoPIPE file, why?
+
"Alert" Messages displayed in AutoPIPE
+
"AutoPIPE Licensing" Messages displayed in AutoPIPE
+
"Autopipe.exe" Messages displayed in AutoPIPE
+
"Beam Section" Messages displayed in AutoPIPE
+
"Bentley AutoPIPE" Messages displayed in AutoPIPE
+
"Bentley Systems, Inc" Messages displayed in AutoPIPE
"Bentley.lictransmit for Windows has stopped working" message appears when using AutoPIPE program, why?
+
"Blank" Messages displayed in AutoPIPE
+
"Bolts*" Messages displayed in AutoPIPE
+
"Confirm" Messages displayed in AutoPIPE
+
"Error" messages displayed in AutoPIPE
+
"Exception Occurred" messages displayed in AutoPIPE
+
"Flange*" Messages displayed in AutoPIPE
+
"Incorrect Data" messages displayed in AutoPIPE
+
"Intel(r) Visual Fortran run-time error" messages displayed in AutoPIPE
+
"Invalid Format" messages displayed in AutoPIPE
+
"License Management Tool" Messages displayed in AutoPIPE
"Message from SofTrack" Messages displayed in AutoPIPE
+
"Microsoft .NET Framework".. messages displayed in AutoPIPE
"Microsoft Visual C++ Runtime Library" message appears in AutoPIPE
"New Case Failed" Messages displayed in AutoPIPE
+
"Note" Messages in AutoPIPE
+
"PCFin" Messages displayed in AutoPIPE
+
"Report Generator Error" Messages displayed in AutoPIPE
+
"Reverse Segment" Messages displayed in AutoPIPE
+
"SACS Export Error" messages displayed in AutoPIPE
+
"Script Error" messages displayed in AutoPIPE
+
"Text Node Editor" Messages displayed in when using OPIM from within AutoPIPE
"Unable to Import the Excel File..." Messages displayed in AutoPIPE
"Use of the selected Application is not allowed while operating offline"... message appears when using the application.
-
"Warnings" Messages displayed in AutoPIPE
W173-9: First 100 points from history will be used warning message appears in AutoPIPE
W177-22: Time history duration is less than first period in modal analysis warning in AutoPIPE
W2014-35: Previous "to" must be the same as current "from" point. warning message in AutoPIPE
+
W2018-11, W2018-12, W2018-16: Not authorized for ???? edition, AutoPIPE reverts to DEMO mode
W21-21: Cannot perform this operation, multiple points selected.... warning message occurred in AutoPIPE, why?
W21-32: Cannot split segments, maximum number of segments reached... warning message appears in AutoPIPE, why?
W21-34: This function can only be applied on junction of two segments... warning message appears in AutoPIPE, why?
W21-38: This function cannot be applied at the current point warning message in AutoPIPE
W214-1: The combination data file (*.CMB) you are about to open was created in a different version... message was seen in AutoPIPE, why?
W2143-1 Following inconsistent data found in Analysis Set 1 Number of load cases does not match...warning message appears in AutoPIPE, why?
W2143-108: Stress Range factor > 1 is not allowed for non-ferrous materials. At Pipe(s) warning message in AutoPIPE
W2143-121: Sc > 20 ksi (138 MPa). In calculation Sc will be set to 20 ksi (138 MPa) for expansion allow for pipe(s) in AutoPIPE
W2143-123: Sh > 20 ksi (138 MPa). In calculation Sh will be set to 20 ksi (138 MPa) for expansion allow at following point(s)in AutoPIPE
W2143-29:Response spectrum case R1 has support group 2 that is no longer defined in model.... warning message appears in AutoPIPE
W2143-37: Extremely high value for Displacement tolerance > 1000 detected in loadset warning message in AutoPIPE
W2143-41: Undefined case referenced for concentrated force found at point.. message appears in AutoPIPE
W2143-45: A Yield(Sy) value of less than or equal to 1.00000 psi is detected on some points. ( AutoPIPE)
W2143-76: Friction scale factor is zero. Friction at all supports will be ignored for following analysis set warning message in AutoPIPE
W2143-7: The joint information of User SIF or flange will be ignored at following point(s) warning message in AutoPIPE
W2164-104: Yield values are zero for the selected material in the material library in AutoPIPE
W2164-106:The following pipe ID's are using a depreciated fatigue curve, limited to 1E6 cycles warning message appears in AutoPIPE, why?
W2164-124: B31 App J: Stress intensification factors… warning message occurred in AutoPIPE, why?
W2164-125:B31 App J: Crotch radius is less than or equal to zero for the tee(s)… warning message occurred in AutoPIPE, why?
W2164-126:B31 App J: Crotch thickness is less than or equal to zero for the tee(s)… warning message occurred in AutoPIPE, why?
W2164-12:System contains Gaps/Friction/Soil data. Please enable non-linear option in the following analysis sets warning message in AutoPIPE
W2164-135:B31 App J: The ratio of crotch thickness to run thickness must be greater than 1.1 for the tee(s)… warning message occurred in AutoPIPE, why?
W2164-145:B31 App J: SIF values for the tee(s) below are not valid,... message appears when using AutoPIPE, why?
W2164-147:B31 App J: SIF values for the tee(s) below are not valid, as the ratio of branch mean diameter to run mean diameter is greater than 0.6… warning message occurred in AutoPIPE, why?
W2164-153: B31 App J - The ratio r2/D2 is smaller than or equal to 0.08 for the reducer(s)… warning message occurred in AutoPIPE, why?
W2164-155: B31 App J - The ratio T1/T2 is smaller than or equal to 1.00 for the reducer(s)… warning message occurred in AutoPIPE, why?
W2164-156: B31 App J - The ratio T1/T2 is greater than or equal to 2.12 for the reducer(s)… warning message occurred in AutoPIPE, why?
W2164-159:The value of "Stiffness" or "Spring Rate" is zero warning message appears in AutoPIPE, why?
W2164-173:Thickness is out of range of library limits for following pipes... message appears when using AutoPIPE, why?
W2164-178:Tee header and branch data was corrupt ... message appears when using AutoPIPE, why?
W2164-181:B31 App J: The following tee(s) contain a primary or secondary node on the branch leg... warning message in AutoPIPE
W2164-192:B31 App J: Collinearity detected on the following tee(s) and will be analyzed as a non-B31J component... message appears when using AutoPIPE, why?
W2164-194:B31 App J: The branch pipe axis is not within 5 degrees normal to the axis of the run pipe for the following tees... message appears when using AutoPIPE, why?
W2164-198:Tee header and branch missing information has been updated on the following point(s):... message appears when using AutoPIPE, why?
W2164-204: The following flange(s) do not consider corrosion... warning message occurred in AutoPIPE, why?
W2164-30: Outside diameter does not match with soil properties at following point(s) warning message occurred in AutoPIPE, why?
W2164-41:Following inconsistencies are found for rotating equipment point included does not have anchor/reference point defined .. warning message occurred in AutoPIPE, why?
W2164-58: Soil ID: xxx ,Bedding const. K cannot be zero. Reset to 0.1... message appears in AutoPIPE
W2164-78: D/t ratio for the following pipe ID(s) is less than 20:... message appears when using AutoPIPE, why?
W2164-93: The value of "Fluid Density Factor" is zero in following analysis sets warning message in AutoPIPE
W2164-94: The validity of SIF data is only demonstrated for a Do/tn ratio less than or equal to 100...warning message occurred in AutoPIPE, why?
W2182-26: Pressure rating on mating flange to a valve is not the same at point xxxx warning message displayed in AutoPIPE
W2182-4: Valve/reducer/flex joint should have flanges at both ends warning message in AutoPIPE
W2261-3: Invalid Pipe ID in "Virtual Anchor" data for following Soil Id(s)...warning message appeared in AutoPIPE
W2261-4: Invalid Point in "Virtual Anchor" data for following Soil Id(s)...warning message appeared in AutoPIPE
W2261-5: The load case selected in "Virtual Anchor" data for following Soil Id(s), does not exist in model...warning message appeared in AutoPIPE
W2261-9: All stiffness values are zero for the following bilinear support(s).… warning message occurred in AutoPIPE, why?
W31-86: No allowable stresses are available for the selected material in the material library warning message in AutoPIPE
W36-14: Support will be hidden since all gaps > gap scale factor x Pipe O.D. message appears when using AutoPIPE
W41-27: Parameters are outside the applicable range warning message in AutoPIPE
W507-14: Modal analysis cannot be performed. Number of modes is zero warning message appears in AutoPIPE
W507-40: No temperature case found for non-linear hydrotest - warning message in AutoPIPE
W507-43: No pressure case found for non-linear hydrotest - warning message in AutoPIPE
W511-67: Hydrotest load cases have been removed from existing analysis sets and new hydrotest loadset has been added. message appears in AutoPIPE
W72-1 AutoPIPE Error Handeling
W726-10: User SIF required at junction at following point(s)... warning message in AutoPIPE
W726-110: Not all gaps are non-zero for following support(s) warning message in AutoPIPE
W726-116: Support will be hidden since all gaps > gap... message appears when using AutoPIPE, why?
W726-12: Following Segment(s) not connected to other segments and has no anchors, Warning message in AutoPIPE
W726-14: No anchors in current system warning message in AutoPIPE
W726-170:The tee at point XXX has only two legs defined which may not meet the conditions to apply the equations for SIF and other stress indices warning message in AutoPIPE
W726-195: Support D10 1-Zero length from 'supported' to 'connected' point warning message in AutoPIPE
W726-205: SIF and flexibility factors have not been validated for D/t > 100 warning message appears in AutoPIPE, why?
W726-2: Gap orientation has changed for guide at point XXX warning message in AutoPIPE
+
W726-34: Inconsistent coordinates were reset at following point(s) - Warning message in AutoPIPE
W726-37: Expansion at (load-case) is outside of temperature range at point XXX for material YYYY.... warning message in AutoPIPE, why?
W726-38: Allowable at ambient is outside of temperature range at point XXX for material YYYY warning message in AutoPIPE
W726-39: Allowable at XX is outside of temperature range at point XXX for material XXXX, warning message in AutoPIPE?
W726-55: Creep data for (xx) is above temperature range. Zero allowable used at point (xxx) for material (yyyy)
W726-6: Near zero length element at point XXX warning message in AutoPIPE
W726-7: Pipe diameter change without a reducer at point XXX warning message in AutoPIPE
W726-8: Kink in straight run of 179.9 deg at point XXX warning message in AutoPIPE
W726-8: Kink in straight run of xx deg at point XXX warning message in AutoPIPE
W726-93: Zero weight flange found at point XXX warning message in AutoPIPE
W726-94: Zero weight valve found at point warning message in AutoPIPE
W726-9: A Guide or Line Stop should not be inserted at following kink point(s)...message appears while using AutoPIPE, why?
W727-2: Temperature is outside the range specified the code for Expansion for AutoPIPE
W727-3: Temperature is outside the range specified by the code for allowable warning message in AutoPIPE
W731-5: Tees are not permitted in HDPE pipe system as per CC N-755-1.
W754-1: Sweep angle is 180 degrees message is displayed in AutoPIPE
W774-47 One or more combinations are set to none warning message in AutoPIPE
W79-85: 0 Stiffness in direction of imposed harmonic load. at XXX warning message in AutoPIPE
W801-121: V-stop liftoff(s) have occurred under operating warning message in AutoPIPE
W801-14: No frequency below cutoff value in AutoPIPE
W801-58: Smallest timestep for xxxx .TIH file = .... warning message in AutoPIPE
W831-11: Seismic level includes cases not analyzed warning message in AutoPIPE
W831-14: Maximum number of combinations limit is reached. message appeared in AutoPIPE
W961-12: System near capacity, please save
W97-213: Corroded thickness is required for sustained stress in B31.3... message in AutoPIPE
W97-99: No analyzed pressure cases present. Only axial GR stress is added message appears in AutoPIPE, why?
01. "C:\Program Files (X86)\..." - Type mismatch dialog message appears when reviewing the results grids in AutoPIPE, why?
+
Application Crashed or Freezes - AutoPIPE
AutoPIPE Report Viewer has stopped working
+
Blank Messages displayed in AutoPIPE
+
Issues that occur when exporting files from AutoPIPE
+
Issues that occur when generating Reports from AutoPIPE
+
Issues that occur when importing PXF files into AutoPIPE
+
Known errors that occur when Installing / Uninstalling AutoPIPE
h. QA&R program for AutoPIPE
i. Security
+
❤︎ Support Solutions and FAQ's in AutoPIPE
+
.Bentley AutoPIPE Vessel (powered by Microprotol)
+
ADL PIPE
+
Bentley AutoPIPE Nozzle
+
Bentley PlantFLOW
+
Bentley PULS
+
AutoPIPE Brand Learning Resources
+
Attend a live meeting with an AutoPIPE Analyst
W2143-7: The joint information of User SIF or flange will be ignored at following point(s) warning message in AutoPIPE
Revision
Creation Date
Revision Author
Select All
Current Revision
Mon, Jul 26 2021 12:00 PM
Mike Dattilio
9
Revision #9
Wed, Nov 8 2017 8:55 AM
Mike Dattilio
8
Revision #8
Thu, Mar 30 2017 5:54 PM
Mike Dattilio
7
Revision #7
Thu, Mar 30 2017 4:21 PM
Mike Dattilio
6
Revision #6
Fri, Mar 24 2017 2:32 PM
Mike Dattilio
5
Revision #5
Thu, Mar 23 2017 5:28 PM
Mike Dattilio
4
Revision #4
Thu, Mar 23 2017 5:28 PM
Mike Dattilio
3
Revision #3
Thu, Mar 23 2017 5:27 PM
Mike Dattilio
2
Revision #2
Wed, Mar 22 2017 12:12 PM
Mike Dattilio
1
Revision #1
Wed, Mar 22 2017 12:11 PM
Mike Dattilio
Compare Versions
View current version