You are currently reviewing an older revision of this page.
The following appears when pressing the Time History Post processor button:
Why and how to avoid it?
Confirm that a Time history Analysis was actually performed.
Step #1,
Confirm both Time History Profile(s), and Time History Location(s) data are correct.
Step #2:
Open the Dynamic Analysis dialog and confirm all Modal and Time History settings are correct.
***Important*** - Time history Analysis Ground Motion dialog or File1-File4 should reference at least one TIH or THL file respectively.
Step #3:
Under Analyze, press "Delete Analysis Results"
Step #4:
Under Analyze, press "Analyze All" button
Step #5:
Confirm that both Modal and Time history are enabled, and press OK button.
Step #6:
Under Results, press "Time History Post Processor" to view the results.
Bentley AutoPIPE