The following is displayed when using AutoPIPE
---------------------------Warning--------------------------- W21-34: This function can only be applied on junction of two segments.---------------------------OK ---------------------------
Why does it appear and What should i do now to avoid it?
There are some commands in AutoPIPE that can not be performed at certain locations in the mode. For instance, joining 2 segments where where one segment starts with a Valve.
Note: there are multiple rules associated with joining segments. Please review them all in AutoPIPE help.
As mentioned above this operation can only be performed between 2 run points and not at a location of a run and component (i.e. Valve face, bend, etc..).
Example:
Joint segment A and B together to form a single segment..
If necessary, add a new temporary node point on segment A before valve, otherwise delete the last node point on Segment A.
Note, last node point on Segment A is now A02.
Select the 1st node point on Segment B, face of valve, B00
Insert Run from front of valve face (B00) to last node point of previous segment, A02
Use Segment Join command to join both segments.
"Warnings" Messages
Bentley AutoPIPE