You are currently reviewing an older revision of this page.
The following appears in AutoPIPE when trying to create Stress Isometric:
---------------------------Bentley AutoPIPE---------------------------Bentley OpenPLANT Isometrics Manager not found, Bentley OPenPlant Isometrics Manager CONNECT Edition 10.5 or higher is required fr generating isometrics.---------------------------OK ---------------------------
Why and How to resolve?
Please read the dialog message again!
In this case, the message clearly states that OPIM v.10.05 or higher must be installed in order to create an Isometric. Confirm that the correct version of the OPIM is installed on the computer. See WIKI here for different methods of confirming your installed software versions (suggest #3).
Install OPIM.
Under "How do I download, install, and license AutoPIPE?"> select a hyperlink from list of available versions> click on hyperlink for "Step #1: Download. This page provide details to download and install some dependencies required by AutoPIPE, one of which was OpenPlant Isometric Manager.
Again, download and install OPIM application before trying to create a Stress Isometric.
Notes:
1. OPIM is a separate installation from AutoPIPE, again, check to be sure that OPIM was installed, if not, locate the installation file for OPIM and start the install process.
2. Creating a Stress Isometric with OPIM is only available if AutoPIPE Advance or AutoPIPE Nuclear license are apart of your contract. There are no extra charge. However, always access OPIM from within AutoPIPE (i.e File> Isometric> Save stress isometric or OpenPlant isometric Manager). Never open OPIM directly or double click a drawing file to open it in OPIM as this could count as usage of OPIM.
3. If OPIM is installed, confirm version of OPIM does not exceed that version number listed as a dependency for the version of AutoPIPE being used (see version readme file)
Example: AutoPIPE 12.00.00.14 has a dependency of OPIM 08.11.11.294. Therefore, do not install a higher version of OPIM with out expressed instructions from AutoPIPE technical support team. If this is the case, uninstall the current version of OPIM, download and install the version of the program listed in release notes here.
"Bentley AutoPIPE" Messages
Bentley AutoPIPE