AutoPIPE Wiki AutoPIPE v 10x and lower video tutorials installed with the program

AutoPIPE v 10x and lower video tutorials installed with the program

Start AutoPIPE, after the application Opens select Help> Tutorial.

Note: these videos are only available on AutoPIPE 10.01.00.08 and lower, because AutoPIPE CONNECT 11.00.xx and higher has a new interface called CONNECT Advisor and new listing of videos.

First Tutorial Videos

Creating a New Model

Create a New System	Insert a Valve	Rotate and Pan	Renumber Points
Insert an Anchor	Windowed Zoom	Build a Branch from a Tee	Copy and Paste
Insert Bends	Insert a Flange	Convert a Run Point Junction to a Bend	Scale, Move, and Stretch
Insert a Run	Set New Pressure and Temperature	Edit Controls	Scale, Move, and Stretch
Insert a Reducer	Insert a Tee	Insert Intermediate Run Points	Select Point to Add Anchors
Insert a Support

Modifying Properties

Make a Copy of the Tutorial Model	Modify Pressure and Temperature Loads	Review Point Properties	Select Range (Input Grids)
Select Range by Pipe Identifier	Graphically Review Pressure and Temperature Loads	Modify Pipe ID (Input Grids)	Modify Pressure and Temperature (Input Grids)
Modify a Pipe Identifier

Loads, Analysis, and Results

Insert Concentrated Load	Define a Static Analysis	Display Load Combinations	Design Change
Assign Thermal Displacements	Perform a Static Analysis	User Defined Load Combinations
Assign Static Earthquake Loads	Graphic Review of Code Stresses	Interactive Review of Displacements

Output Report

Output Report

Second Tutorial Videos

Creating and Connecting Segments

Open an AutoPLANT PXF Model	Convert a Run Point to a Tee	Create a New Disconnected Segment	BEND_8
Review AutoPLANT Data	Add Nozzle Flexibility	Connect to Another Segment	BEND_8

Viewing Options

Model View Options

Creating and Inserting a Frame Model

Create a Frame Model	Solid Model Frame View	Insert an AutoPIPE Model
Add Anchors to a Frame	Insert Multiple Run Points	Connect a Frame to Pipe

Analysis and Results

Perform a Static Analysis	Review Interactive Displacement Results	Apply Result Filter Criteria	Rotating Equipment Compliance
Define Combination Options	Review Displacement Results (Input Grids)	Select Combinations	Review Code Stress Results
Review Code Stress Results (Input Grids)

AutoPIPE v 10x and lower video tutorials installed with the program

First Tutorial Videos

Second Tutorial Videos

See Also