The following is displayed when performing a model consistency check report:
* * * W A R N I N G - MODEL * * *W2143-1 Following inconsistent data found in Analysis Set 1 Number of load cases does not match
Why is that and how to Avoid it?
Typically this is a warning to the user that Analysis set XX may have load cases that are not complete or actually missing.
Please see the following AutoPIPE help section:
User should follow these instructions:
1. Generate a model input listing that contains only Load Cases description sub-report.
2. Next, open each Analysis Sets dialog that list all of the analysis sets configured in the model and locate the analysis set from the Warning message.
3. Expand the Load Cases column to see all of the load case names in that analysis set
4. Confirm each load case is actually in the input listing report created previously.
As seen here T2 is missing from the sub report, thus the warning message.
5. Fix by removing T2 from Analysis Set #1.
There is a reported issue that this warning will appear even though all the load cases are present, this has been logged (1004410) and should be fixed in the next release of AutoPIPE scheduled for release in Jan. 2023 baring any testing issue.
How to model a Pulled Bend?
"Warnings" Messages
Bentley AutoPIPE