04. Stress Isometric: spring hanger Hot load (Hanger Hot), TDisp (Thermal Movement), & Var. % report zero in OPIM's summary data table generated by AutoPIPE, why

Applies To
Product(s):	AutoPIPE
Version(s):	ALL;
Area:	Stress Isometric
Date Logged & Current Version	Jan 2023 12.08.04.009

Problem:

Stress Isometric: Hot load,TDisp, & Var. % report zero for hangers in OPIM data table generated by AutoPIPE, why?

Solution:

Settings and printed results

1. If a support's Undesign chechbox is checked ON and no hanger selection is run then all fields are blank except the TDISP

2. If a support's Undesign chechbox is checked ON and hanger selection performed then all fields will show non-zero values

3. If a spring is designed i.e. overwritten cold preload and spring rate then these values will appear under Cold and Rate fields, The Hot, Var %, No. and TDISP fields will be shown but Size, Range ID fields will be blank.

04. Stress Isometric: spring hanger Hot load (Hanger Hot), TDisp (Thermal Movement), & Var. % report zero in OPIM's summary data table generated by AutoPIPE, why

Problem:

Solution:

See Also